i2ES 3105 is a pneumatic tool to cut SIL contacts on substrates after soldering operation has taken place.
The cutting length is adjusted by means of a endless screw mechanism. Provided that strip is kept adherent to the lower reference, it is possible to cut strips composed of several circuits.
Contact cutting range: the minimum is 4 mm (from ceramic) - the maximum is almost up to the lead frame tie-bar.
Circuit size: Maximum strip length is 7.87 inches (200 mm).
Tool Dimensions: 340 mm x 260 mm x 230 mm (LxWxH)
Tool Weight: 10 Kg