i2ES 3106 is a pneumatic tool to cut SIL contacts on substrates after soldering operation has taken place.
The cutting length can be varied by replacing special calibrated shims, to be ordered separately. It is possible to cut strips of multiple circuits, provided that the entire strip is kept adherent to the reference.
Contact cutting range: the minimum is 4 mm (from ceramic) - the maximum is almost up to the lead frame tie-bar.
Circuit size: Maximum strip length is 10 inches (254 mm).
Tool Dimensions: 390 mm x 260 mm x 240 mm (LxWxH)
Tool Weight: __n.d.__ Kg